DIY cheap water ionizer to make alkaline water ph+

How to make a cheap water ionizer that splits regular tap water into acidic and alkaline. Ionized alkaline water has many health benefits to restore your natural healing balance. See this guide for more info: bit.ly
Video Rating: 4 / 5

This wonderful portable unit makes as much Alkaline water as you need. What a blessings at 5% of the cost of a table model. PLease visit: www.water-4-health.com

Incoming search terms:

  • stone turn water alkaline
  • homemade water ionizer
  • diy water ionizer
  • diy ionizer
  • alkalizing machine for water kanga system
  • ionizer diy
  • kangen water diy
  • natural stone to turn water to alkaline water
  • orp water ionizer homemade
  • scalar-pendant diy

23 Responses to “DIY cheap water ionizer to make alkaline water ph+”

  • youcantt says:

    @youcantt
    oh you can got them in lowes home depot ace or any place like that.

  • youcantt says:

    @BestHBCU
    those are washers I Would use stainless. ( if You have them ) :)

  • dcw0881 says:

    So if I understand, we put a tube in between the containers and insert a sponge or membrane to keep the water from moving back and forth. BUT I have a question If we only need the electrons to cross over then why have a tube and sponge at all ? Why not just add two additional terminals which you connect between the containers. Wouldn’t this accomplish the same? things without having to cut a hole in the side of the container ? doesn’t electrons pass as easily within a wire from one to the ot

  • BestHBCU says:

    Hi, thanks for the video. What are those metal rings that you are using as your electrodes and where can I get them?

  • TheSubversiveSound says:

    what’s the orange stuff you’re using to prevent leakage?

  • prepperskills says:

    Using electrolysis to turn table salt into bleach. minute amounts, but enough to change the ph of the water.

  • steelrodeo says:

    @hangover71 I go at least 12V. Any less would take too long to achieve high PH. Transformer for flat screen monitor, computer speaker, and modem are usually 12V. I have used a laptop power suply and it work very fast. If you plan to drink your experiment, I would not use exposed copper, because it will oxidize and contaminate the water.

    No, it does not tase salty.

  • hangover71 says:

    Same aslast guy, is that a phone charger? does the water taste salty?

  • Labyrynth1000 says:

    Decent set up, but you never mentioned what voltage the wall transformer puts out.
    6 V , 9 V 12 V ?
    But i’m sure it would work in any case, good video

  • jak3ps2 says:

    Hey this is my video?

  • sensyquellepointhu says:

    hi))LOOK AT THIS ..ALKALINE WATER FROM AIR wwwpointsensyquelle.hu
    -500 ORP AND 9.5 PH

  • shay85022 says:

    @Lorenxz100 Greetings. If I understand your question you are asking how long the water stays treated from the bottle. Normally the negative ORP looses it charge in 30 minutes from any alkaline water maker. The other aspect of Alkaline water will stay that way for 24 hours. Another answer is this. Just keep the water in the bottle until you are ready to drink it, since this is a portal unit.

  • cooldaddyy says:

    ive never seen clear wine before,,,,

  • twazzercheese says:

    @stracypt you doubt too much. Ive gone one, they work exactly as shown

  • MrAFJM says:

    For Alkaline & Ion water, this machine is to much expensive.

    1.- You need a one “Scalar Energy Pendant ” USD 15.00 from Quantum Science.

    2.- a glass of water USD 0.25

    3.- one pencil’s graphite USD 0.30

    4.- and Radio Shack digital multimeter USD 30.00 ( set mV option ) for ORP measure. This measure is for a Qty you need of Ions.

    5.- reach with this method = -240 ( anions ) ORP

  • MrAFJM says:

    For Alkaline & Ion water, this machine is to much expensive.

    1.- You need a one “Scalar Energy Pendant ” USD 15.00 from Quantum Science.

    2.- a glass of water USD 0.25

    3.- one pencil’s graphite USD 0.30

    4.- and Radio Shack digital multimeter USD 30.00 ( set mV option ) for ORP measure. This measure is for a Qty you need of Ions.

    5.- reach with this method = -240 ( anions ) ORP

  • MrJeffw223 says:

    Great video! You really don’t have too spend thousands on these machines inorder too have good drinking water. eBay and amazon
    Have these items for less than a hundred bucks and you can travel with them.

  • shay85022 says:

    @bmwproductions96 Not ever is the bottle replaced. just the cartridge that holds the stones eventually wares out.

  • shay85022 says:

    @JuryDutySummons Drinking Baking soda is dangerous and has many side affects. In fact Baking soda should not even be used in cooking. Plus baking soda is an artificial way to raise up as a high PH. Not a natural way such as this bottle. Using all natural stones also replaces the Electrolytes.

  • bmwproductions96 says:

    do you ever need to replace the bottle

  • shay85022 says:

    @stracypt Thats the point we did not and would not use such deception. The water is turned alkaline by the all natural stones in the bottle.
    There isnt any baking soda in our water and when a person purchases such a unit they can do this experiment at home (without baking soda).

  • stracypt says:

    …but the video doesn’t really tell us anything. The person could have put baking soda (NAHCO3) in his ‘energy’ water to make the pH turn blue (alkaline) instead of yellow (acid).

  • Lorenxz100 says:

    Hi shay, nice probes, and quelity instruments.
    A question: How many time keep the ionization the treated water?
    There are a methode to keep this ionization properties more time?
    I saw another video here wich samone say air oxygen desionizing trated water quickly. How many quicly?

Leave a Reply

Security Code: